Exit emulator with different controller types

Home Forums RetroPie Project Everything else related to the RetroPie Project Exit emulator with different controller types

RetroPie has a new website and forum. Please visit https://retropie.org.uk/ for the new site. The new forum is located at https://retropie.org.uk/forum/. This forum is left here as a read-only archive.

This topic contains 1 reply, has 1 voice, and was last updated by Profile photo of trimmtrabb trimmtrabb 2 years, 8 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #29503

    Steve

    Hi everyone, so I have my USB NES and SNES controllers setup and working properly. I wanted to be able to exit the emulator with select + start so I added this to my retroarch.cfg:

    input_enable_hotkey_btn = 6
    input_exit_emulator_btn = 7

    …and that works perfectly with my SNES controller. Pressing select and start will exit the emulator as expected. It doesn’t work for my NES controller though. Looking at the config file for that controller select is 8 and start is 9. Is there any way I can setup my .cfg files so that the select+start to exit emulation works correctly for both of my controllers?

    Thanks in advance for any help.

    #29915
    Profile photo of trimmtrabb
    trimmtrabb
    Participant

    Hi, this thread may help you: http://www.raspberrypi.org/forums/viewtopic.php?t=71858&p=518721

    es_config location is now /etc/emulationstation/

    If you have found the solution to your problem please mark the topic as resolved.

Viewing 2 posts - 1 through 2 (of 2 total)

Forums are currently read only - please visit the new RetroPie forums at https://retropie.org.uk/forums/

Skip to toolbar