es_infut.cfg / deviceGUID

RetroPie has a new website and forum. Please visit https://retropie.org.uk/ for the new site. The new forum is located at https://retropie.org.uk/forum/. This forum is left here as a read-only archive.

This topic contains 4 replies, has 1 voice, and was last updated by  Thomas 2 years, 8 months ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #23947

    Thomas

    es creates a inputconfig for my ps3 controller and my snes to usb adapter

    <inputConfig type=”joystick” deviceName=”HuiJia USB GamePad” deviceGUID=”030000008f0e00001330000010010000″>
    <input name=”a” type=”button” id=”1″ value=”1″ />
    <input name=”b” type=”button” id=”2″ value=”1″ />
    <input name=”down” type=”axis” id=”1″ value=”1″ />
    <input name=”left” type=”axis” id=”0″ value=”-1″ />
    <input name=”pagedown” type=”button” id=”7″ value=”1″ />
    <input name=”pageup” type=”button” id=”6″ value=”1″ />
    <input name=”right” type=”axis” id=”0″ value=”1″ />
    <input name=”select” type=”button” id=”8″ value=”1″ />
    <input name=”start” type=”button” id=”9″ value=”1″ />
    <input name=”up” type=”axis” id=”1″ value=”-1″ />
    </inputConfig>
    <inputConfig type=”joystick” deviceName=”Sony PLAYSTATION(R)3 Controller” deviceGUID=”030000004c0500006802000011010000″>
    <input name=”a” type=”button” id=”13″ value=”1″ />
    <input name=”b” type=”button” id=”14″ value=”1″ />
    <input name=”down” type=”button” id=”6″ value=”1″ />
    <input name=”left” type=”button” id=”7″ value=”1″ />
    <input name=”pagedown” type=”button” id=”11″ value=”1″ />
    <input name=”pageup” type=”button” id=”10″ value=”1″ />
    <input name=”right” type=”button” id=”5″ value=”1″ />
    <input name=”select” type=”button” id=”0″ value=”1″ />
    <input name=”start” type=”button” id=”3″ value=”1″ />
    <input name=”up” type=”button” id=”4″ value=”1″ />
    </inputConfig>

    but i want a config for my retrolink usb snes controller!
    the name is “USB Gamepad” or “USB Gamepad ” but i cant find the device GUID to create my own config like this

    <inputConfig type=”joystick” deviceName=”USB Gamepad” deviceGUID=”how can i find this?”>
    <input name=”a” type=”button” id=”1″ value=”1″ />
    <input name=”b” type=”button” id=”2″ value=”1″ />
    <input name=”down” type=”axis” id=”1″ value=”1″ />
    <input name=”left” type=”axis” id=”0″ value=”-1″ />
    <input name=”pagedown” type=”button” id=”5″ value=”1″ />
    <input name=”pageup” type=”button” id=”4″ value=”1″ />
    <input name=”right” type=”axis” id=”0″ value=”1″ />
    <input name=”select” type=”button” id=”8″ value=”1″ />
    <input name=”start” type=”button” id=”9″ value=”1″ />
    <input name=”up” type=”axis” id=”1″ value=”-1″ />
    </inputConfig>

    #24037
    Profile photo of trimmtrabb
    trimmtrabb
    Participant

    Hi, this thread may help you, specifically post #8

    If you have found the solution to your problem please mark the topic as resolved.

    #24079

    Thomas

    which post?

    #24116
    Profile photo of trimmtrabb
    trimmtrabb
    Participant

    lol forgot to paste the link oops..
    http://blog.petrockblock.com/forums/topic/atari-usb-joystick-with-emulationstaion-help/

    If you have found the solution to your problem please mark the topic as resolved.

    #24140

    Thomas

    the name of my retrolink snes usb gamepad is “USB Gamepad ”

    /opt/retropie/emulators/RetroArch/configs

    input_device = “USB Gamepad ”
    input_driver = “udev”
    input_b_btn = “2”
    input_y_btn = “3”
    input_select_btn = “8”
    input_start_btn = “9”
    input_up_axis = “-1”
    input_down_axis = “+1”
    input_left_axis = “-0”
    input_right_axis = “+0”
    input_a_btn = “1”
    input_x_btn = “0”
    input_l_btn = “6”
    input_r_btn = “7”

    input_enable_hotkey_btn = “8”
    input_exit_emulator_btn = “9”
    input_menu_toggle_btn = “0”
    input_load_state_btn = “6”
    input_save_state_btn = “7”
    input_state_slot_increase_axis = “+0”
    input_state_slot_decrease_axis = “-0”
    input_reset_btn = “2”

    /home/pi/.emulationstation

    <?xml version=”1.0″?>
    <inputList>
    <inputConfig type=”joystick” deviceName=”USB HID v1.10 Joystick [USB Gamepad ]”>
    <input name=”a” type=”button” id=”1″ value=”1″ />
    <input name=”b” type=”button” id=”2″ value=”1″ />
    <input name=”down” type=”axis” id=”1″ value=”1″ />
    <input name=”left” type=”axis” id=”0″ value=”-1″ />
    <input name=”pagedown” type=”button” id=”5″ value=”1″ />
    <input name=”pageup” type=”button” id=”4″ value=”1″ />
    <input name=”right” type=”axis” id=”0″ value=”1″ />
    <input name=”select” type=”button” id=”8″ value=”1″ />
    <input name=”start” type=”button” id=”9″ value=”1″ />
    <input name=”up” type=”axis” id=”1″ value=”-1″ />
    </inputConfig>
    <inputConfig type=”joystick” deviceName=”USB Gamepad “>
    <input name=”a” type=”button” id=”1″ value=”1″ />
    <input name=”b” type=”button” id=”2″ value=”1″ />
    <input name=”down” type=”axis” id=”1″ value=”1″ />
    <input name=”left” type=”axis” id=”0″ value=”-1″ />
    <input name=”pagedown” type=”button” id=”5″ value=”1″ />
    <input name=”pageup” type=”button” id=”4″ value=”1″ />
    <input name=”right” type=”axis” id=”0″ value=”1″ />
    <input name=”select” type=”button” id=”8″ value=”1″ />
    <input name=”start” type=”button” id=”9″ value=”1″ />
    <input name=”up” type=”axis” id=”1″ value=”-1″ />
    </inputConfig>
    </inputList>

    does not work…

    but

    <inputConfig type=”joystick” deviceName=”Sony PLAYSTATION(R)3 Controller” deviceGUID=”030000004c0500006802000011010000″>
    <input name=”a” type=”button” id=”13″ value=”1″ />
    <input name=”b” type=”button” id=”14″ value=”1″ />
    <input name=”down” type=”button” id=”6″ value=”1″ />
    <input name=”left” type=”button” id=”7″ value=”1″ />
    <input name=”pagedown” type=”button” id=”11″ value=”1″ />
    <input name=”pageup” type=”button” id=”10″ value=”1″ />
    <input name=”right” type=”button” id=”5″ value=”1″ />
    <input name=”select” type=”button” id=”0″ value=”1″ />
    <input name=”start” type=”button” id=”3″ value=”1″ />
    <input name=”up” type=”button” id=”4″ value=”1″ />
    </inputConfig>

    this works with the ps3 usb controller…

    but i need the snes controller to work…

    hilfe…

Viewing 5 posts - 1 through 5 (of 5 total)

Forums are currently read only - please visit the new RetroPie forums at https://retropie.org.uk/forums/

Skip to toolbar