Down + Right buttons cannot be configured in estation.

Home Forums RetroPie Project Controller Configuration in RetroPie Down + Right buttons cannot be configured in estation.

RetroPie has a new website and forum. Please visit https://retropie.org.uk/ for the new site. The new forum is located at https://retropie.org.uk/forum/. This forum is left here as a read-only archive.

Tagged: , ,

This topic contains 3 replies, has 2 voices, and was last updated by Profile photo of buzz buzz 1 year, 4 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #95917
    Profile photo of techstep
    techstep
    Participant

    Hello,

    So, I purchased a USB SNES Adapter off Amazon. And the controller is detected in emulation station (Hold down A) comes up as SFC/USB. But, when I go to configure it

    I cannot configure the Down or Right on the D-Pad.

    Up, Left, Start, Select, A,B,X,Y,ShoulderL,ShoulderR all configure fine. I tried with several different SNES controllers and they are all the same.

    #100448
    Profile photo of techstep
    techstep
    Participant

    I am bumping this to see if anyone can help me out with this. Its still pending.

    #111359
    Profile photo of techstep
    techstep
    Participant

    I am coming back to bump this again. Anyone ever found a solution for this? I have seen other posts around the internet but they don’t have solutions that work either besides some dead ends that used to work.

    #111364
    Profile photo of buzz
    buzz
    Keymaster

    Which USB snes adapter ? Impossible to advise without at least some basic information. Maybe it is faulty? Did you test it on another system ?

Viewing 4 posts - 1 through 4 (of 4 total)

Forums are currently read only - please visit the new RetroPie forums at https://retropie.org.uk/forums/

Skip to toolbar