ControlBlock official setup guide?

Home Forums RetroPie Project Controller Configuration in RetroPie ControlBlock official setup guide?

RetroPie has a new website and forum. Please visit https://retropie.org.uk/ for the new site. The new forum is located at https://retropie.org.uk/forum/. This forum is left here as a read-only archive.

This topic contains 3 replies, has 3 voices, and was last updated by Profile photo of Jeffery Jeffery 1 year, 11 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #96572
    Profile photo of g0nz0uk
    g0nz0uk
    Participant

    Sorry, where can I find the ControlBlock office setup guide, I’ve had a search?

    I have one in the post for my Pi2 and need to plan this for my bartop.

    I want to see how I can bind a button to the Escape key which will by a button on the side of the bartop to exit a game.

    Thanks

    #96615
    Profile photo of petrockblog
    petrockblog
    Keymaster

    The “official guide” can be found in the lower part of the ControlBlock article at http://blog.petrockblock.com/2014/12/29/controlblock-power-switch-and-io-for-the-raspberry-pi/#Software_Setup_and_Configuration.

    #96624
    Profile photo of g0nz0uk
    g0nz0uk
    Participant

    Thanks that is very useful, but how can I exit a game with just a joystick and buttons?

    #96978
    Profile photo of Jeffery
    Jeffery
    Participant

    Add this to your retroarch.cfg file
    I have different configs set up for each emulator so i can do different things.

    input_enable_hotkey_btn = 10
    input_exit_emulator_btn = 11

    I use arcade controls, so i have a “select” button that is button 10. I am going to use that as my “hotkey” for different macros

Viewing 4 posts - 1 through 4 (of 4 total)

Forums are currently read only - please visit the new RetroPie forums at https://retropie.org.uk/forums/

Skip to toolbar