Control Block Button Press Unintentional

Home Forums RetroPie Project GPIO Adapter, ControlBlock etc. Control Block Button Press Unintentional

RetroPie has a new website and forum. Please visit for the new site. The new forum is located at This forum is left here as a read-only archive.

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of petrockblog petrockblog 1 year, 12 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #96041
    Profile photo of sharpie

    I just installed Retro pie to my Raspberry Pi 2 and even with no buttons plugged into the control block it thinks that the up joystick key has been pressed and the down one it says “already mapped”

    any help would be great =D

    Profile photo of petrockblog

    Are you using a CPU overclocking setting? If so, set the clock to default and look if this behavior persists. Then you could go on and try to increase the CPU clock step-by-step. Hope that helps!?

Viewing 2 posts - 1 through 2 (of 2 total)

Forums are currently read only - please visit the new RetroPie forums at

Skip to toolbar