Cannot Get PowerA 360 Controller to Work

Home Forums RetroPie Project Everything else related to the RetroPie Project Cannot Get PowerA 360 Controller to Work

RetroPie has a new website and forum. Please visit https://retropie.org.uk/ for the new site. The new forum is located at https://retropie.org.uk/forum/. This forum is left here as a read-only archive.

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of trimmtrabb trimmtrabb 3 years ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #5993
    Profile photo of shadowsofgames
    shadowsofgames
    Participant

    I can’t seem to get my PowerA XBOX 360 controller to setup correctly. I have enough power in the system, because the controller’s home-button icon’s light is flashing appropriately. I went through the setup as described on

    “http://www.cnet.com/how-to/create-a-retro-game-console-with-the-raspberry-pi/”

    but nothing is working. Anybody know how to solve this? 20 mins of internet combing has proved useless.

    #6012
    Profile photo of trimmtrabb
    trimmtrabb
    Participant

    Hi, install jtest:

    sudo apt-get install joystick

    And then run:

    jstest /dev/input/js0

    If the controller is recognised you should be able to test the buttons.

    If you have found the solution to your problem please mark the topic as resolved.

Viewing 2 posts - 1 through 2 (of 2 total)

Forums are currently read only - please visit the new RetroPie forums at https://retropie.org.uk/forums/

Skip to toolbar