Amiga Emulation – only Disk or black screen

Home Forums RetroPie Project Everything else related to the RetroPie Project Amiga Emulation – only Disk or black screen

RetroPie has a new website and forum. Please visit https://retropie.org.uk/ for the new site. The new forum is located at https://retropie.org.uk/forum/. This forum is left here as a read-only archive.

Tagged: 

This topic contains 0 replies, has 1 voice, and was last updated by Profile photo of masterehm masterehm 3 years, 4 months ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #3387
    Profile photo of masterehm
    masterehm
    Participant

    Hi,

    I’m using the latest Retropie SD Image. Updated the raspbian, retropie_setup.sh Script and the RetroPie Binaries.
    Afterwards I followed the Wiki Instruction [1] about the Amiga emulation (slightly difference: uae4rpi instead of uae4all) and copied the kick.rom under /home/pi/RetroPie/emulators/uae4rpi/ and the gamerom file under /home/pi/RetroPie/emulators/uae4rpi/roms.
    I start the Amiga emulation as follows:

    cd /home/pi/RetroPie/emulators/uae4rpi
    ./uae4all

    Either I get the typical Hand/Disk-Image (e.g. [2]) or a black screen. In the typical screen no keyboard input is recognized. I only see three color symbols in the bottom right corner: one red, and two green with numbers. The first green one change from 00 to 01 after a few seconds and vice versa.

    So, what am I doing wrong here?
    Thx in advance.

    [1] https://github.com/retropie/RetroPie-Setup/wiki/Amiga-emulator-%28UAE4All%29
    [2] http://www.ravn.de/contentfiles/Image/blog/amiga_workbench.jpg

Viewing 1 post (of 1 total)

Forums are currently read only - please visit the new RetroPie forums at https://retropie.org.uk/forums/

Skip to toolbar