srfrboybob
Participant
Post count: 43

Retrogame worked great for me. I followed the instructions on adafruit. https://learn.adafruit.com/retro-gaming-with-raspberry-pi/buttons

Then I used the pocket pigrrl software setup page for the four button setup after I followed the basic install of retrogame. I soldered my buttons to the same gpio pins as the pocket pigrrl. It was also important to not use gpio 24 and 25 if I remember correctly. If you use these pins the buttons just won’t respond. I would definitely read this adafruit guide and solder to the same gpio pins. https://learn.adafruit.com/pocket-pigrrl/software-1